W56RAC0650
QuickSeam FormFlash — detailing flashing
Uncured EPDM flashing for corners, pipes and T-joints. 15.25 m per roll.
You will also need: QuickPrime Plus
198,83 €
HomeQuickSeam tapesQuickSeam Flashing — edge and detail flashing
Elevate · QuickSeam tapes
QuickSeam Flashing — edge and detail flashing
EPDM flashing tapes: 5" (127 mm, 30.5 m) for roof edge metal and 18" SA (450 mm, 15.25 m) for details and repairs.
You must also have
QuickSeam Flashing cannot be used without these products.
QuickPrime Plus — primertapes and accessories bond only to a primed surface76,59 €
Technical data
| 5" Flashing | 127 mm × 30.5 m, semi-cured, for 1–2 dimensional details |
|---|---|
| 18" SA Flashing | 450 mm × 15.25 m, cured, self-adhesive, 1.5 mm thick |
| Storage | 15–25 °C, min. 12 months |
Use
5" Flashing: joining the membrane to roof edge metal (≥ 50 mm onto the membrane); not for three-dimensional (3D) details — use FormFlash for those. 18" SA Flashing: repairs, tie-ins to existing EPDM (≥ 76 mm onto each sheet), T-joints, details and patches.
Installation tips — EPDM buyer’s guide. Data: Elevate technical data sheets (EU).
Item codes and prices
| W56RAC1615 | 5" · 127 mm × 30,5 m · 1 roll | 376,74 € |
| W56RAC1620 | 18" SA · 450 mm × 15,25 m · 1 roll | 578,34 € |
Frequently bought together
W563587041EU
QuickPrime Plus — primer
Primer for QuickSeam tapes and accessories. Without it the tape will not hold.
You will also need: QuickScrubber kit
FLAMMABLE76,59 €
W56358703E
Lap Sealant HS — lap sealant
Sealant for FormFlash and SA Flashing edges, T-joints and bars.
1 cartridge
9,20 €
W563587066E
Splice Wash SW-100 — membrane cleaner
Cleaner for dirty or weathered EPDM membrane before priming.
FLAMMABLE46,02 €