W56358703E
Lap Sealant HS — lap sealant
Sealant for FormFlash and SA Flashing edges, T-joints and bars.
1 cartridge
9,20 €
HomeQuickSeam tapesQuickSeam FormFlash — detailing flashing
Elevate · QuickSeam tapes
QuickSeam FormFlash — detailing flashing
Uncured EPDM flashing for corners, pipes and T-joints. 15.25 m per roll.
You must also have
QuickSeam FormFlash cannot be used without these products.
QuickPrime Plus — primertapes and accessories bond only to a primed surface76,59 €
Technical data
| Thickness | 1.6 mm + tape 0.6 mm |
|---|---|
| Roll length | 15,25 m |
| Below 15 °C | warm with a heat gun |
| Storage | 15–25 °C, min. 12 months |
Use
Inside and outside corners, non-standard pipes, overlays on T-joints and tape splices. Cut edges are sealed with Lap Sealant HS.
Installation tips — EPDM buyer’s guide. Data: Elevate technical data sheets (EU).
Item codes and prices
| W56RAC0650 | 152 mm · 1 roll | 198,83 € |
| W56RAC1650 | 229 mm · 1 roll | 289,38 € |
| W56RAC1653 | 305 mm · 1 roll | 467,31 € |
| W56RAC162A | 450 mm · 1 roll | 803,88 € |
Frequently bought together
W563587041EU
QuickPrime Plus — primer
Primer for QuickSeam tapes and accessories. Without it the tape will not hold.
You will also need: QuickScrubber kit
FLAMMABLE76,59 €
W56RAC1603
QuickSeam Splice Tape — seam tape
Tape for joining EPDM sheets. 30.5 m per roll.
You will also need: QuickPrime Plus
104,58 €