W56RAC1616
QuickSeam Batten Cover Strip
Cover strip over the batten bar. 30.5 m per roll.
You will also need: QuickPrime Plus
152 mm × 30,5 m · 1 roll
424,18 €
HomeBars and fastenersMetal Batten Strip
Elevate · Bars and fasteners
Metal Batten Strip
Steel batten strip for securing the membrane: straight 3.05 m bars or a 67 m coil.
You must also have
Metal Batten Strip cannot be used without these products.
QuickSeam Batten Cover Stripthe bar is covered with Batten Cover Strip424,18 €
Technical data
| Straight bar | 25 mm × 3.05 m, Ø 8.7 mm holes every 152 mm |
|---|---|
| Coil | 25 mm × 67.06 m, holes every 76 mm |
| Material | Galvalume AZ55 |
Use
Base tie-in of upstands (spacing ≤ 300 mm), fastened in sequence from one end. Coil — for walls and areas needing tight fastener spacing.
Installation tips — EPDM buyer’s guide. Data: Elevate technical data sheets (EU).
Item codes and prices
| W56RAC3053 | Straight · 25 mm × 3,05 m · 1 bar | 9,02 € |
| W56RAC3052 | Coil · 25 mm × 67,06 m · 1 roll | 136,80 € |
Frequently bought together
W56RAC3061
Termination Bar — aluminium termination bar
Aluminium bar for the top edge of the membrane on a wall, 3.05 m.
You will also need: Water Block Seal S-20
1 bar 3.05 m
14,51 €